Please fill in and Hyfoma.com will send you an e-mail containing this article.
This article is not yet available in the language you selected
Flash pasteurizer for pasteurization of beverages
Flash pasteurizer for pasteurization of beverages
What is measured and for what reason:
Temperature: |
Is the main parameter to monitor and to control the process |
Pressure: |
Is used to increase the performance. Rising pressure difference between in and outlet indicates a build up on the plate, that need to be cleaned then. |
Flow: |
Is used for process control |
Data recording: |
Is used to save the important quality relevant process data, but also to monitor alarm points in flow and temperature. |
Why is it special:
The flash pasteurizer is installed after the filtration unit. This is the last chance to get rid of microorganisms that may harm a product. The product is heated to a very specific temperature and kept there for a short while. Temperature and time are used for a very accurate control of the unit. To high temperature or to long times harm the product.
How can it be solved best:
Temperature: |
RTD assemblies are designed for sanitary installations. |
Flow: |
An electromagnetic flow meter is the solution. Depending on hot or cold side use, the P or H sensor is recommended. |
Pressure: |
Differential pressure transmitters are recommended. |
Data recording: |
Memograph is the ideal choice or heating or cooling systems. Recording all needed data with including alarm point signals. |
Para más información:
Endress+Hauser GmbH